Automatic Durometer – Automatic Shore IRHD Hardness Tester

Automatic Durometer – Automatic Shore IRHD Hardness Tester

Universal Centring Device for O-Rings:

The centering device enables efficient hardness testing of O-rings with rope sizes ranging from 1 to 11 mm and internal diameters up to 200 mm.

To perform the test, place the O-ring on the extension plate, positioned between two adjustment micro-cylinders.

Using the adjustment wheel, you can set the distance between the cylinders according to the O-ring's rope size.

A fixing clip ensures the proper positioning of curved pieces.

The device attaches to the instrument's standard plate through magnetic fixing, allowing for quick installation and removal.

Diaphragm Centering Device for O-Rings:

The device allows for automatic multiple tests on O-rings or round parts with external diameters between 4.5 and 75 mm. It consists of a diaphragm to secure the external diameter of the O-ring and a gauge-meter for adjusting the diaphragm's center position.

Using the device is straightforward:

1. Open the diaphragm and place the O-ring in the center of the device.
2. Close the diaphragm using the open-close lever until the O-ring is securely centered.
3. Use the gauge-meter to adjust the device's position based on the O-ring's diameter and cross-section.
4. Initiate a multiple test session to automatically perform tests at different points on the sample.

When testing several O-rings with the same dimensions, you can replace the O-ring on the device without requiring further adjustments.

Centring Device for Cylinders and Hoses:

The centering system allows for measuring Micro-IRHD hardness on the outer surface of rubber tubes with a maximum external diameter of 50 mm (other dimensions available upon request). The device eliminates the need for sample preparation to keep it flat.

To conduct a test, simply place a piece of the hose on the device and press the start button.

Automatic Sample Displacement:

The motorized ascent and descent movement of the specimen enables the test to be conducted automatically.

Sample Holder Extension for Automatic Hardness Tester with 300 mm diameter:

The extension of the sample holder allows for testing big-size samples with a 300 mm diameter. The support, made of Aluminum, can be added to the standard sample holder, increasing the bearing surface to accommodate larger samples.

Development and Production:

The Automatic Durometer – Automatic Shore IRHD Hardness Tester undergoes complete development and manufacturing at our WorldofTest partner, Gibitre’s state-of-the-art facility in Italy, and Europe and it’s supported globally.

All mechanical parts are produced in the company workshop using state-of-the-art CNC machines. Components and sensors from reputable brands are carefully chosen to ensure maximum measurement reliability.

Internal, trained personnel handle all production stages, including assembly, start-up, calibration, packing, shipment, and installation.