Hydraulic Universal Testing Machines - HW Series

Parent Product

Universal Testing Machine - Tensile Tester

Test Property

Standards

Universal Testing Machine - QT-HW2 Series

Rigid 4-column load frame construction providing superior axial and lateral stiffness and minimum maintenance, low reaction at specimen failure. Chrome plated columns for easy cleaning and longer life.

Extra-length screws and columns, with an adjustable lower crosshead, to increase the available test space for longer test specimens. Double acting crossbeam quickly accommodates specimens of varying lengths. In the case of the additional length of columns, the maximum testing space is adjustable to meet extra length specimens.

Fully open front hydraulic wedge grips make it easy to insert and remove specimens for increased productivity and operator safety. Interchangeable design allows a limited number of jaw faces to accommodate a large range of specimen sizes. Fully open front wedge clamps for easier loading and allowing rapid loading and unloading of specimens. Including grip control system mounted directly at the machine Tooling for tension, compression, bend/flex, shear, and other tests available. With digital displacement transducer for the best positioning and measuring accuracy.

Applications

The UTM is used to evaluate the tensile, compression, bend, and shear properties of materials including and metallic materials.

Qualitest’s High Strength Frame Dual Space Servo Hydraulic Universal Testing Machine series is used to verify various mechanical properties of:

Metal: Pipe, tube, wire, rod, strip, plate and strip
Fasteners: Tensile, proof, single and double shear
Construction materials: Rebar, wire strand, mesh, folding, compression of concrete and components

Control Software is used to control the Universal testing machine. The Tester and the software are designed to accommodate a wide variety of testing needs. The software has a variety of pre-set programmed test cycles for compression, tensile and cyclical testing to meet a variety of testing standards.

A powerful Help wizard helps the operator to set up and connect the accessories in many phases. Includes installed packages of various test methods according to major national and international reference standards and different types of material to perform the following tests:

Traction
Compression
Flexure
Cycles
Spring tests
Customize your own tests

This program is complete with a graphic interface for

The structure of the software is very flexible giving the possibility to personalize the tests, process the results and certificates, and in particular, it is possible to

Selection of communication language
The setting of test methods
Test execution
Analysis of the results
Printing of the certificates
Graphic post-analysis of the tests
Statistical analysis of the tests

Create custom tests
Customize the certificate
A print certificate with Company logo
Print certificates anytime in future, as a single test as well as summarizing certificate
Analyze a test anytime in the future.

Theory/Method

Reference Standards

Metal

Tensile tests at ambient temperature

Compression tests at ambient temperature

Shear Tests

Strand tensile tests

ASTM E8M–09

AS 1391

ISO 15630-2

ASTM C39

EN12390-3

ASTM E 143

ASTM A 416

ASTM A370-07b

ASTM A 706/A,

706M - 6a

ASTMC469

DIN1048

ASTM 496

ASTM A185, A185M-07

ASTM A48M-03

EN 10002-1

ISO 4506

UNI6556

BS 5896

ASTM A615, A615M-09

HB 5143

EN 10080

ISO6784

ASTM A82, A82M – 07

ISO 15630-1

JIS Z 2241

Metals and Construction Material

Bend Tests

ASTM A185/A185M – 07

API 5L

ISO 7438

ASTM E190

AWS B4.0

Welded Fabric

Shear Tests

ASTM E8M – 09

ASTM A82/ A82M

ISO 15630-2

HB 5143

ASTM A370-07b

ASTM A 706/A

ISO 6394

JIS Z 2241

ASTM A185/ A185M

AS 1391 706M - 06a

BS 18

ASTM A615/A615M-09

ASTM A48M-03

EN 10002-1

ASTM A82/ A82M – 07

ISO 15630-1

EN 10080– 07

Fasteners

Tensile tests for bolt

Nut load keeping tests

ASTM F606-07

ISO 898-1

ASTM E290 – 09

ISO 7438

ISO 15630-2

JIS Z 2248

AS 4291.1

ASTM A370-07b

ISO 15630-1

ISO 10065

Cement, Concrete and Rock

Flexural tests for cement

Compression tests for cement

Flexural tests for concrete

ASTM C348

ASTM C349 -08

ASTM C 78 – 07

ASTM C1609 /, C1609M

ASTM C109, C109M – 08

ISO 1920-4

ISO 679

BS EN 196-1

Technical Specifications

Model	QT-HW2-600	QT-HW2-600-EXT
Capacity	600kN
Load Resolution	Capacity/300, 000 (fully auto scaling of single measurement range)
Stroke	250 mm
Testing Speeds	0.1~70 mm/mi
Adjustable Crosshead Speed	350 mm/mi
Diameter of Round Specimens for Tensile Test	ᴓ6 ~ ᴓ 16 mm, ᴓ 13 ~ ᴓ 27 mm, ᴓ27 ~ ᴓ 40 mm
Thickness of Flat Specimens for Tensile Test	0 – 30 mm
Width of Flat Specimens for Tensile Test	<90mm
Compression Platen Dimensions	ᴓ 178mm
Load Measurement Accuracy	±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721
Strain Measurement Accuracy	±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.
Speed Accuracy	Set speed＜10% Max. Speed: ±1% Set speed ≥10% Max. speed:±0.5%
Position Measurement Accuracy	±0.5 of reading or 0.001 mm, whichever is greater
Power Supply	3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s
Operating Temperature	0 to +38°C (+32 to +100°F)
Humidity Range	10% to 90% non-condensing
Storage Temperature	-40 to +66°C (-40 to +150°F)
Machine Dimensions
Clearance Between Grips (H1) Piston Inside	750 mm	900 mm
Clearance Between Platens (H2) Piston Inside	750 mm	900 mm
Clearance Between columns (W)	500mm	500mm
Dimensions WXDXH *Adjusted based on configuration	950x600x2320	950x600x2500
Weight *Adjusted based on configuration	2575kg	2600kg

Model	QT-HW2-1000	QT-HW2-1000-EXT
Capacity	1,000kN
Load Resolution	Capacity/300, 000 (fully auto scaling of single measurement range)
Stroke	250 mm
Testing Speeds	0.1~70 mm/mi
Adjustable Crosshead Speed	350 mm/mi
Diameter of Round Specimens for Tensile Test	ᴓ6 ~ ᴓ 20 mm, ᴓ 20 ~ ᴓ 40 mm, ᴓ 40 ~ ᴓ 60 mm
Thickness of Flat Specimens for Tensile Test	2 – 40 mm, 30 – 60 mm
Width of Flat Specimens for Tensile Test	<110mm
Compression Platen Dimensions	ᴓ 220mm
Load Measurement Accuracy	±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721
Strain Measurement Accuracy	±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.
Speed Accuracy	Set speed＜10% Max. Speed: ±1% Set speed ≥10% Max. speed:±0.5%
Position Measurement Accuracy	±0.5 of reading or 0.001 mm, whichever is greater
Power Supply	3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s
Operating Temperature	0 to +38°C (+32 to +100°F)
Humidity Range	10% to 90% non-condensing
Storage Temperature	-40 to +66°C (-40 to +150°F)
Machine Dimensions
Clearance Between Grips (H1) Piston Inside	810 mm	900mm
Clearance Between Platens (H2) Piston Inside	810 mm	900mm
Clearance Between columns (W)	575mm	575mm
Dimensions WXDXH *Adjusted based on configuration	1030x650x2500 mm	1030x650x2600 mm
Weight *Adjusted based on configuration	3425 kg	3450kg

Model	QT-HW2-2000	QT-HW2-2000-EXT
Capacity	2,000kN
Load Resolution	Capacity/300, 000 (fully auto scaling of single measurement range)
Stroke	250 mm
Testing Speeds	0.1~70 mm/mi
Adjustable Crosshead Speed	330 mm/mi
Diameter of Round Specimens for Tensile Test	ᴓ5 ~ ᴓ 16 mm, ᴓ 15 ~ ᴓ 45 mm, ᴓ 40 ~ ᴓ 70 mm
Thickness of Flat Specimens for Tensile Test	0 – 40 mm, 30 – 70 mm
Width of Flat Specimens for Tensile Test	<150mm
Compression Platen Dimensions	330x330mm
Load Measurement Accuracy	±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721
Strain Measurement Accuracy	±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.
Speed Accuracy	Set speed＜10% Max. Speed: ±1% Set speed ≥10% Max. speed:±0.5%
Position Measurement Accuracy	±0.5 of reading or 0.001 mm, whichever is greater
Power Supply	3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s
Operating Temperature	0 to +38°C (+32 to +100°F)
Humidity Range	10% to 90% non-condensing
Storage Temperature	-40 to +66°C (-40 to +150°F)
Machine Dimensions
Clearance Between Grips (H1) Piston Inside	760 mm	890mm
Clearance Between Platens (H2) Piston Inside	760 mm	890mm
Clearance Between columns (W)	575mm	575mm
Dimensions WXDXH *Adjusted based on configuration	1300x900x2920 mm	1300x900x3050 mm
Weight *Adjusted based on configuration	7825 kg	7875kg

Model	QT-HW2-3000
Capacity	3,000kN
Load Resolution	Capacity/300, 000 (fully auto scaling of single measurement range)
Stroke	250 mm
Testing Speeds	0.1~70 mm/mi
Adjustable Crosshead Speed	260 mm/mi
Diameter of Round Specimens for Tensile Test	ᴓ20 ~ ᴓ 50 mm, ᴓ 50 ~ ᴓ 80 mm, ᴓ 80 ~ ᴓ 100 mm
Thickness of Flat Specimens for Tensile Test	0– 50 mm, 50 – 100 mm
Width of Flat Specimens for Tensile Test	<180mm
Compression Platen Dimensions	ᴓ 280mm
Load Measurement Accuracy	±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721
Strain Measurement Accuracy	±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.
Speed Accuracy	Set speed＜10% Max. Speed: ±1% Set speed ≥10% Max. speed:±0.5%
Position Measurement Accuracy	±0.5 of reading or 0.001 mm, whichever is greater
Power Supply	3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s
Operating Temperature	0 to +38°C (+32 to +100°F)
Humidity Range	10% to 90% non-condensing
Storage Temperature	-40 to +66°C (-40 to +150°F)
Machine Dimensions
Clearance Between Grips (H1) Piston Inside	900 mm
Clearance Between Platens (H2) Piston Inside	900 mm
Clearance Between columns (W)	575mm
Dimensions WXDXH *Adjusted based on configuration	1390x990x4950 mm
Weight *Adjusted based on configuration	18000 kg

Video

Hydraulic Universal Testing Machines - HW Series

Hydraulic Universal Testing Machines - HW Series

Universal Testing Machine - QT-HW2 Series

Reference Standards

Contact Us

Testing by Material

Testing by Test Type

Contact Qualitest

News

Trusted Seller